Welcome to our site!
This 32-channel FPV wireless transmitter and receiver combo uses the latest technology to give you a lightweight and small video transmitter. Another great feature of this 5.8GHz transmitter is that is comes with a pushbutton that you can use to set the channel. No more complicated switches to adjust to get the correct frequency. And the last used channel is always stored so you don't need to set the channel each time you turn your transmitter on.
This small but powerful 5.8GHz 200mW transmitter gives you a range of up to 2000m with just the stock antenna! And the advanced, built-in regulator allows the transmitter to accept a very wide power input range.
The VA2500 combines an FPV camera and a 25mW, 5.8GHz transmitter into a single unit no bigger than a thimble. Its signal range is ideal for small park flyers or racing quads and it can be powered separately or through the model's receiver. Powering it separately requires a 2S or 3S Li-Po battery. If powering it through the receiver, its integrated power filter will prevent interference from the model's motor and servos.
The VA2500 is compatible with all 5.8GHz Fat Shark headsets and can be installed in minutes. If your RC system has a spare channel, you can remotely change the frequency via a dial or switch on your transmitter.
The 600mW version of the 5.8GHz transmitter greatly increases the range of a 5.8GHz link, adding a margin of security over the 25mW version. Team up with a Duo5800 or Uno5800 receiver on the ground and enjoy noise-free video further than you can see your model.
4720 W. University Ave.Las Vegas, NV 89103Call us: (702) 228-8883Email: email@example.com